3
Place the
section between the bottom plate and top barrels of the Babyliss
PRO Triple Barrel Waver. Ensure you are about 2cm away from
the scalp.
|
4
Clamp
the Weaver shut and hold for about five seconds.
|
5
Move the
Waver down and make sure you place the first barrel in the last
wave so the waves interlock together without any harsh lines
or dents.
|
6
Move down ensuring that you place the first barrel in the
last wave.
|
7
Move
down until you have completed the section and tuck tails into
the barrel with a tail comb for a smooth finish.
|
8
The wave should be continuous and smooth.
|
9
Moving to the top section, again take five sections about 5cm,
2cm away from the scalp and turn the wavers up slightly on an
angle to avoid creating hard lines around the crown.
|
10
Always ensure the plate is under the hair with the barrels clamping
down onto it. Because the plate has an edge to it, it is essential
you tilt it to avoid creating a ridge.
|
11
Keeping away from the scalp creates a soft movement off the
head.
|
